Physical Stats |
Form Factor |
• Extended ATX |
Dimensions |
• 12" x 13.05" (30.5cm x 33.2cm) |
Processor/Cache |
CPU |
• Dual 604-pin FC-mPGA4 Sockets
• Supports up to two Intel® 64-bit Xeon™ processor(s)
of the same type below:
• Xeon (Nocona) CPU with 1MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
• Xeon (Irwindale) CPU with 2MB L2 Integrated
Advanced Transfer Cache, up to 3.60 GHz
• Xeon LV (Low Voltage) CPU , up to 2.8 GHz |
System Bus |
• 800 MHz system bus |
Operating System
Software |
• Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems
• OS
Compatibility Chart |
System Memory |
Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266MHz memory
• Dual channel memory bus |
Memory Type |
• DDR333/266MHz buffered (registered) ECC SDRAM 72-bit,
184-pin gold-plated DIMMs |
DIMM Sizes |
• 512 MB, 1GB, 2GB, 4GB** |
Memory Voltage |
• 2.5 V only |
Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 Single Device Data Correction
(SDDC) |
On-Board Devices |
Chipset |
• Intel® E7520 chipset
• MCH + ICH5R + PXH + BCM5721 |
SATA |
• ICH5R SATA Controller
• RAID 0, 1, JBOD support |
IPMI |
• Support for Intelligent Platform Management Interface
v.2.0
• ( Optional:
AOC-IPMI20-E ) |
Network Controllers |
• 2x Broadcom BCM5721 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output |
Graphics |
• ATI Rage XL SVGA PCI video controller with 8 MB
of video memory |
Super I/O |
• Winbond 83627HF chip |
Input / Output |
Serial ATA |
• Two Serial ATA ports
• Two SATA hard drives supported |
IDE |
• Dual EIDE channels support up to four UDMA IDE
devices
• Supports ATA/100 |
Floppy |
• 1 Floppy controller; 1.44 MB support |
LAN |
• 2x RJ45 LAN port |
USB |
• 2x USB rear ports
• 1x USB internal dual header supports up to 2 USB
ports
• 1x USB internal header supports single USB port
• USB 2.0 Compliant |
VGA |
• 1x VGA port |
Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
Serial Ports |
• 1 Fast UART 16550 serial port and 1 serial header |
Chassis ( Optimized
for X6DHE-XB2 ) |
2U |
• SC823i-R500RC
• SC823i-550LP |
3U |
• SC833i-R760
• SC833i-550
• SC733i-R760
• SC733i-550 |
Rackmount Tower
/ 4U |
• SC743i-R760
• SC743i-650
• SC742i-600
• SC742i-550
• SC742i-500
• SC742i-420
• SC942i-600 |
Important Chassis
Notes |
• To ensure system stability, a 420W (minimum) ATX
power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
• Chassis must have CPU mounting holes required for
800MHz FSB CPUs with this serverboard. |
Expansion Slots |
PCI-Express |
• 1 (x4) signal on a (x8) slot |
PCI-X |
• 2x 64-bit 133MHz PCI-X (3.3V) slots
• 4x 64-bit 100MHz PCI-X (3.3V) slots |
System BIOS |
BIOS Type |
• 8Mb Flash EEPROM with Phoenix® BIOS |
BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.3
• ACPI 1.0
• USB Keyboard support |
Management |
Software |
• Optional IPMI (Intelligent Platform Management
Interface) 2.0
• Super Doctor
III
• Watch Dog
• NMI |
Power Configurations |
• ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Power-on mode control for AC power loss recovery |
PC Health Monitoring |
CPU |
• Monitors for CPU Cores(+1.8V, +3.3V, +5V, ±12V,
+3.3V Standby, +5V Standby, & VBAT)
• CPU Core 4-Phase-switching voltage regulator with
auto-sense from 0.86V-1.63V |
FAN |
• Total of four 4-pin + four 3-pin fan headers
• 8x fans with status monitoring
• Status monitor for speed control
• Status monitor with software on/off control
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connector |
Temperature |
• Monitoring for CPU, chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• I 2 C temperature sensing logic
• Thermal Monitor 2 (TM2) Support |
LED |
• CPU / System Overheat LED
• Suspend-state indicator LED |
Other Features |
• Chassis intrusion detection
• Chassis intrusion header
• SDDC |