Search:

4 - Channel Fan Controller


Best Cooling Solution


THERMALTAKE WINDOWED RH-F030-2SW ATX CASE


Make Your Hard Drive Portable


Powerful & Quiet for Servers

SUPERMICRO X6DAL-TB2-O DUAL XEON INTEL E7525 DDR2 SATA PCI-E
SUPERMICRO X6DAL-TB2-O  
 
Shipping Extra  
ATACOM Part #: MBXE_SUPE_X6_AA  
   Price: $

 
Chassis Matrix (PDF)
Thermal Components Matrix (PDF)

Physical Stats
• ATX
• 12" x 10" (30.5cm x 25.4cm)
Processor/Cache
• Dual 604-pin FC-mPGA4 Sockets
• Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
• Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
• Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
• Xeon LV (Low Voltage) CPU , up to 2.8 GHz
• 800MHz system bus
System Memory
• Six 240-pin DIMM sockets
• Supports up to 12 GB DDRII 400MHz memory
• Dual channel memory bus
• Memory must be populated in pairs
• DDRII 400MHz buffered (registered) ECC SDRAM 240-pin gold-plated DIMMs
• 256 MB, 512 MB, 1GB, 2GB
• 1.8 V only
On-Board Devices
• Intel® E7525 chipset
• 6300ESB + BCM5721
• 6300ESB SATA Controller with support for 2x SATA ports
• Adaptec AIC-8130: Marvell 88SX6041 4-port Hercules-2, rev B2, (4x drive) SATA Controller with support for 4x SATA ports
• RAID 0, 1, and JBOD support
• Support for Adaptec 2020SA (SATA) ZCR Card: 1A, 3.3V, low profile 2.5" x 6.6" [Card not included]
• Supports RAID 5, 10
• Dual Broadcom BCM5721 Single Port Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
• CK409B
Input / Output
• 6 SATA Ports
• Dual EIDE channels support up to four UDMA / IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
• 2 USB rear ports
• 2 USB internal headers
• USB 2.0 / 1.1 Compliant
• 2x RJ45
• 2 Fast UART 16550 serial ports
• Winbond 83627 HF
• 1 ECP/EEP parallel port header
• 1 Floppy controller; 1.44 MB, 3-mode support
• PS/2 keyboard and mouse ports
Chassis ( Optimized for X6DAL-TB2 )
• SC733T-450
• SC733T-645
• SC743T-645
• Note: Extension cable (CBL-0062) is required for SC743 Chassis.
• To ensure system stability, a 420W (minimum) ATX power supply 8-pin (+12V) + 4-pin + 24-pin is required.
• Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
Expansion Slots
• 1 PCI-Express (x16) slot
• 2x 64-bit 66MHz PCI-X (3.3V) slot
• 2x 32-bit 33MHz PCI (5V) slot
System BIOS
• 8Mb Flash EEPROM with AMI® BIOS
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.3
• PCI 2.2
• ACPI 1.0
• BIOS rescue hot keys
• USB Keyboard support
• Hardware BIOS Virus protection
Management
• Super Doctor III
• Watch Dog
• NMI
• ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Suspend to RAM (STR)
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
PC Health Monitoring
• Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V & +3.3V / +5V Standby
• Adjustable CPU clock frequency ratio settings (via BIOS)
• Total of six 4-pin fan headers
• Status monitoring for speed control
• Support 3-pin fans
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connector
• Monitoring for CPU, chassis, environment
• CPU thermal trip support
• PC temperature sensing logic
• Thermal Monitor 2 (TM2) support
• CPU / System Overheat LED
• +5V Standby alert LED
• Suspend-state indicator LED
• Chassis intrusion detection
• Chassis intrusion header
1. Dual Intel® 64-bit Xeon™ Support, Up to 3.6 GHz, 800 MHz FSB
2. Intel® E7525 Chipset
3. Up to 12GB DDRII 400MHz SDRAM
4. Dual Broadcom BCM5721 Gigabit Ethernet Controllers
5. 4x SATA Ports via Adaptec Controller 2x SATA Ports via 6300ESB On-chip SATA Controller
6. 1 (x16) PCI-Express, 2x 64-bit 66MHz PCI-X, 2x 32-bit 33MHz PCI
7. Low Noise Fan Speed Control
 
©1998 ATACOM, Inc. All rights reserved. Published by ATACOM,Inc. All product names throughout this catalog are trademarks of their respective holders.