Search:

PNY Quadro 4000 2GB Fermi VCQ4000-PB w/256 Cores


Innodisk D150SH SATA DOM


Kingston 8GX DDR3-1600 PC3-12800 CL9 XMP


LSI LSI00194 / 9211-8I MEGARAID 8-Port SAS


Supermicro X9DRD-EF LGA2011 C602J

SUPERMICRO SuperServer SYS-7045A-WTB 4U BLACK W/ X7DWA-N BOARD W/ 6 x 3.5IN SATA DRIVE BAYS/ 2 x 5.25IN DRIVE BAY/ FLOPPY DRIVE/ 865W AC-DC POWER SUPPLY W/ PFC

Images shown for reference only
Actual Color: Black
SUPERMICRO SuperServer SYS-7045A-WTB 4U BLACK W/ X7DWA-N BOARD  
 
Shipping Extra  
ATACOM Part #: SYSR_SUPE_74_51  
   Price: $1264.16

 

Supermicro
SYS-7045A-WTB
Super X7DWA-N
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel®
Xeon®Processor 5400/5300LV sequence (Harpertown/Clovertown processor) up to 3.0 GHz
Dual-Core Intel®
Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.16 GHz
1600 / 1333 / 1066 MHz system bus
Eight 240-pin DIMM sockets
Supports up to 64 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
512 MB, 1GB, 2GB, 4GB , 8GB**
1.8 V or 1.5 V
Intel® 5400 (Seaburg) chipset
ESB2
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B(+))
(Optional: AOC-SIMLP-3(+)) with 3rd LAN support
Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
  • N/A
  • Winbond 83627HG chip
  • ALC 883 High Definition 7.1 Channel Audio
  • 2 (x16) PCI-e (Gen 2.0) slots
    2x 64-bit 133MHz PCI-X (3.3V) slots
    2x 32-bit PCI slots
    1x UIO slot
    Six Serial ATA ports
    Six SATA hard drives supported
    Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
    Compact Flash (40-pin connector, IDE 1, single channel) slot
    Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    1 Floppy controller; 1.44 MB, 2.88 MB
    2x RJ45 LAN ports
    4x USB rear ports
    1x USB internal header
    Total 5 USB 2.0 Compliant / 1.1 Compliant
    High Definition 7.1 Channel Audio
    Line-in / Line-out / Microphone Ports
    1 Fast UART 16550 serial port
    1 Serial header
    4U Rackmountable / Tower
    Optional Rackmount Kit (CSE-PT26)
    SC743TQ-865
  • 7.0" (178mm)
  • 17.2" (437mm)
  • 25.5" (648mm)
  • 63 lbs (28.6kg)
  • Black
  • Power On/Off button
    System Reset button
    Power LED
    Hard drive activity LED
    2x Network activity LEDs
    System Overheat / Fan Fail LED
    2x USB Ports
    6x SATA Hot-swap Drives
    2x 5.25" Peripheral Drive Bay
    1x 5.25" Bay For Floppy Drive
  • Panasonic 3.5" 1.44MB Floppy Drive
  • SC743 SAS / SATA Backplane w/ Enclosure Management
  • 4x 5000 RPM Hot-swappable PWM Cooling Fans
    1x 4000 RPM Hot-Swappable Rear Exhaust PWM Fan
    1x Air Shroud
    865W AC power supply w/ PFC
  • 100 - 240V, 50-60Hz, 12-6 Amp
  • N/A
  • 30Amp
  • 6.5Amp
  • 70 Amp
  • 1 Amp
  • 30 Amp
  • 8Mb Flash EEPROM with Phoenix® BIOS
    EFI BIOS Support
    Plug and Play (PnP)
    DMI 2.3
    PCI 2.2
    ACPI 1.0 / 2.0
    USB Keyboard support
    Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
    5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
    Total of eight 4-pin fan headers supporting up to 8 fans
    8x fans with tachometer status monitoring
    Status monitor for speed control
    Support 3-pin fans (w/o speed control)
    Low noise fan speed control
    Pulse Width Modulated (PWM) fan connectors
    Monitoring for CPU and chassis environment
    CPU thermal trip support
    Thermal Control for 8x fan connectors
    PC temperature sensing logic
    PECI
    Thermal Monitor 2 (TM2) support
    CPU / System Overheat LED
    Suspend-state indicator LED
    Chassis intrusion detection
    Chassis intrusion header
    SDDC Support
    1. Dual Intel® 64-bit Xeon® Quad-Core or
    Dual-Core, with 1600 / 1333 / 1066 MHz
    FSB
    2. Up to 64GB DDR2 800 / 667 / 533
    SDRAM Fully Buffered DIMM (FB-DIMM)
    3. 2 (x16) PCI-Express 2.0,
    2x 64-bit 133MHz PCI-X,
    2x 32-bit PCI,
    1x UIO Slots 4. Intel® 82575EB Dual-port Gigabit
    Ethernet Controller
    5. 8 x 3.5" Hot-swap Drives Trays
    6x SATA Hard Drives Supported
    6. 865W Low-Noise Power Supply
    7. Tower or Rackmount
    8. PWM Fan Speed Control
     
    ©1998 ATACOM, Inc. All rights reserved. Published by ATACOM,Inc. All product names throughout this catalog are trademarks of their respective holders.